OverviewSpecificationMechanicalConnectionDownload
Overview
Leadshine MX4660 is a 4-axis stepper drive with built-in breakout board and I/O's. It is specially designed to allow EASY and RAPID implementation for full control of 4 stepper motors of frame sizes 17, 23, 24, or 34. By taking step & direction commands, the MX4660 can be easily controlled by motion controllers, PLC’s, CNC software (e.g. Mach 3/4, EMC)…. This makes it ideal for many applications in industries such as CNC machinery (CNC routers, plasma, laser welders, mills, machining centers, jewelry mills…), electronics, semi-conductor, medical, textile, etc. for easy, quick and cost-effective implementation.
Based on the latest DSP technology and Leadshine’s advance stepper control algorithm, the MX4660 adopts features such as damping, anti-resonance, multi-stepping, input pulse smoothing, automatic idle current reduction … It offers high precision, excellent torque, extra low noise, very low motor heating, and smooth driven motor movement. With the working voltage of 20-60VDC and output current up to 6.0A, the MX4660 can drive 4 two-phase (1.8 degree) or four-phase (0.9 degree) stepper motors from NEMA 17 to 34 in full power with high reliability.
The MX4660 is easy to configure without the use of software. With the four DIP switches (one for each axis), a user can easily configure the eight 1.41-6.0A output current settings, and one of the eight 200-12,800 (full to 1/64 step) resolution settings. Each axis can have its configurations different from any of other axes to meet its own control requirements.
A Leadshine MX4660 stepper drive has one E-Stop input, one analog input (0-10 VDC), one fault output, 8 general digital inputs, and 6 general digital outputs. This allows quick and easy I/O connections such as E-Stop, home/limit switches, VFD..., to save installation space & time, minimize wiring, increase system reliability, and cut costs. Through the 4 high-speed general digital outputs (200 kHz), the MX4660 also allows control expansion for 2 additional axes, which is ideal to control 5-axis and 6-axis machines/devices.
The MX4660 adopts modular design with 4 individual stepper drive boards. If any the drive boards malfunctions, a user can easily replace it with a SDM660 stepper drive module at minimal cost.
Specification
| Model: | MX4660 | | Axis No.: | 4 | | Phase: | 2 | | Control Mode: | Step & Direction | | Max Input Frequency: | 200KHz | | Input Voltage Range: | 20 - 60 VDC | | Suggested Power Supply Voltage Range: | 20-54 | | # of DIP Switch Resolution Configurations: | 8 | | DIP Switch Resolution Setings: | 200, 400, 800, 1600, 2000, 3200, 6400, 12800 | | # of DIP Switch Current Configurations: | 8 | | DIP Switch Current Configurations: | 1.41A, 2.12A, 2.83A, 3.54A, 3.96A, 4.24A, 4.95A, 6.0A | | Logic Current Range: | 7-16mA (10mA typical) | | Logic Voltage Range: | 5-24VDC for pulse Active high (default),or 0-0.5V for pulse active low | | Pulse enabled at: | Rising edge | | Idle Current Percentage: | 50 % | | # of Digital Inputs: | 8 | | # of Digital Onputs: | 6 | | Step Width: | 2,500ns | | Minimal Direction Setup Time: | 3,000 ns | | Protection: | Over current;over voltage | | Isolation Resistance: | 500M Ohm | | Environment: | Avoid dust, oil fog and corrosive gases | | Ambient Temporature: | 0-50°C | | Humidity: | 40–95% RH | | Operating Temporature: | 0-70°C | | Vibration: | 5.9 m/s2 Max | | Storage Temporature: | -20-65°C | | Specification: | 8.66 x 3.05 X 1.57 Inches | | Weight: | 1.45 lbs |
Mechanical Specification
Unit: mm
1 inch = 25.4 mm
Download(s) for
| Datasheet: |
MX4660d_V1.2.pdf |
|
Hardware installation manual:
|
MX4660hm_V1.1.pdf
|
| Mach3 xml file for MX4660: |
MX4660_MACH3_Xml.zip |
|
Matching Stepper Motorshybrid stepping motor
AMT offers matching stepper motors for MX4660 to satisfy your application needs. Made of high quality materials, those stepper motors can run
very qietly and smoothly with low noise, low motor heating. They have been widely implemented in various industrial applications.
To see all stepper motors that AMT offers, please click here.
Matching Power Suppliesstepper servo power supply
AMT offers matching power supplies for MX4660. Those power supplies were specially designed to handle back EMF from stepper or servo motors in motion controls.
To see all power supplies that AMT offers, please click here.
|
Frequently Bought CNC Kits Including MX4660
The following cnc kits are frequently bought by our customers in the past to simply their purchasing process and save time.
All individual products included in those sets have been fully tested, and implemented by hundreds of OEM industries around the world. Further discounts
are also offered for them.
|
MX-P423-382: 4-Axis NEMA 23 CNC Stepper Kit. 382 Oz-In NEMA 23 Motors with 3/8'' (9.525mm) Single Shaft; 4-Axis MX4660 Stepper Drive; 48 VDC/10.4A Power Supply 85-132 or 176-265 VAC Input
|
1 Pc. / 5 Pc. Price:
$629.00 / $599.00
|
|
MX-P423-400: 4-Axis NEMA 23 CNC Stepper Kit. 400 Oz-In NEMA 23 Motors with 1/4'' (6.35mm) Single Shaft; 4-Axis MX4660 Stepper Drive; 48 VDC/10.4A Power Supply 85-132 or 176-265 VAC Input
|
1 Pc. / 5 Pc. Price:
$629.00 / $599.00
|
|
MX-P423-495: 4-Axis NEMA 23 CNC Stepper Kit. 495 Oz-In NEMA 23 Motors with 3/8'' (9.525mm) Single Shaft; 4-Axis MX4660 Stepper Drive; 48 VDC/10.4A Power Supply 85-132 or 176-265 VAC Input
|
1 Pc. / 5 Pc. Price:
$659.00 / $629.00
|
|
MX-P434-595: 4-Axis NEMA 34 CNC Stepper Kit. 595 Oz-In NEMA 34 Motors with 1/2'' (12.7mm) Single Shaft; 4-Axis MX4660 Stepper Drive; 48 VDC/10.4A Power Supply 85-132 or 176-265 VAC Input
|
1 Pc. / 5 Pc. Price:
$739.00 / $709.00
|
|